Every kind of cabinet painting work we do has a page below explaining the prep involved and what its quote covers.
Each page lays out a problem, why Barrie kitchens run into it, and what the work does about it.
Kitchen cabinet painting starts with the doors, the drawer fronts and the boxes already in the house, cuts the grease and old sheen off them, primes each for its material and sprays on a new colour that cures hard enough for everyday use.
See Kitchen Cabinets
Tannins in golden oak get sealed under shellac before anything else happens. Filler then closes the open pores until they disappear, and sprayed colour finishes doors that were solid all along. Oak cabinet painting suits them well.
See Oak Cabinets
Cabinet spray painting is sprayed cabinet painting: primer and topcoat go on as a fine mist in thin, even passes, so doors and boxes finish with a smooth, level film free of brush ridges, roller stipple and thick edges that chip.
See Spray Painting
Thermofoil, melamine and laminate doors take paint only over a bonding primer made to grip slick factory surfaces, followed by a sprayed topcoat, which lets doors that would otherwise shed ordinary paint within months hold a new finish instead.
See Thermofoil and Melamine
Two-tone work puts one colour on the perimeter cabinets and another on the island or lower run, giving a plain kitchen depth and a focal point without buying a single new cabinet.
See Two-Tone and Islands
Cabinet refinishing leaves the wood on display: the worn finish gets stripped or sanded away, fresh stain goes on where the colour is shifting, and instead of paint the doors get sealed beneath a sprayed clear coat.
See Refinishing
Refacing means fresh doors and drawer fronts hung on boxes worth keeping, while a single damaged door simply gets swapped for a new one; old and new then pass through one booth together so nothing looks different.
See Refacing and New Doors
Cottage kitchen cabinet painting deals with knotty pine that bleeds through paint, small kitchens that need to stay usable, and buildings that are cold and closed for half the year, by using shellac primer and timing the work for the warm months.
See Cottage Kitchens
Hardware and hinge work fills old handle holes, drills fresh ones on a template once the finish has cured, and swaps tired self-closing hinges for soft-close ones, so new pulls and quiet doors arrive with the new colour.
See Hardware and Hinges
Bathroom vanity painting brings the kitchen routine of degreasing, priming and a sprayed topcoat to the small cabinet under the sink, over one or two days, paying extra attention to the doors that sit closest to the water.
See Bathroom Vanities
Pantry, laundry and built-in work covers cabinetry that cannot travel to a booth, from walk-in pantries and laundry or mudroom runs to fireplace wall units, mantels and bookcases, every piece sprayed in place inside a sealed enclosure.
See Pantries and Built-Ins
Small galleys, building rules, elevator bookings and parking are what condo kitchen cabinet painting has to manage, so doors go out for spraying and the unit stays livable while the boxes take a day or two.
See Condo Kitchens
A cabinet colour consultation fixes the colour and sheen ahead of cabinet painting by spraying one of your own doors in the real product and leaving it in the kitchen, so the decision gets made under the room's own light.
See Colour ConsultationPhone +1 (705) 230-7220 and describe the cabinets, and you will hear which page fits and when the visit can happen.
Tell us about the kitchen in whatever detail you have and a call follows to arrange the visit. The form goes through as soon as it has your name and a phone number on it. When a call is simpler, dial +1 (705) 230-7220.
